When you work on a construction site, you likely have a bulldozer or two in your arsenal. Like all heavy equipment, they occasionally run into mechanical issues. Read on for some common bulldozer problems and solutions. If you need bulldozer or other construction equipment repair, contact Warrior Diesel Services , in Laurel, Mississippi.
Track Problems
Sometimes after the engine gets hot, one track side will stop working. In this case, there is likely an issue with the steering clutches. When you make a right or left turn, the steering clutch on the opposite side should release. If the clutches are worn out, they will need to be replaced to fix the problem.
Bulldozer Unable To Move Backward or Forward
If your bulldozer can only move backward and forward for a short time, or not at all, start by checking the oil. If there appears to be metal or debris in the hydraulic filter, it could indicate a problem with the pump or the drive motor. In this case, the hydrostatic drive pump will need to be disassembled and serviced.
Electrical Issues and Repairs in Laurel
A problem with the electrical system could eat up valuable work hours. If your bulldozer won’t turn on, start simple. Check the drain valve at the bottom of the tank for water. Next, check the fuel filter. It may need to be cleaned and even replaced. After being in use all day, the fuel lines and tank can get clogged with sediment and dirty water; clean it out every day to prevent future problems. If you still have no luck, contact Warrior Diesel Services . Our 24/7 mobile service will come to you for the job.
If you’d like to learn more about Warrior Diesel Services in Laurel, Jackson, Hattiesburg, and the surrounding Mississippi towns, don’t hesitate to give us a call at (601) 401-8795 . Our diesel mechanics would be happy to answer any questions you may have or provide you with an estimate for the cost of mobile fleet maintenance in Laurel, MS, and beyond. Thank you for considering us for your heavy equipment and semi-truck maintenance needs.
Copyright 2021